x 


UKP-PRO [Zestaw]

ukp-pro_bialy.jpgukp-pro_bialy.jpg
ukp-pro_bialy.jpg
ukp-pro_bursztyn.jpg
ukp-pro_zielony.jpg
ukp-pro_niebieski-cyjan.jpg
utcomp-pro_screens.jpg
Dostępne
Zestaw UKP-PRO z wyświetlaczem OLED 3,2" oraz akcesoriami. Współpracuje również z Android.
$184.63
Wyświetlacz:

Jeden wyświetlacz - wiele wskazań!

Podłącz zewnętrzne czujniki i miej pod kontrolną wszystkie ważne parametry pracy takie jak temperatura oleju / silnika / skrzyni, ciśnienie oleju / paliwa / doładowania, temperaturę spalin (EGT), skład mieszanki paliwowo-powietrznej (AFR) i wiele więcej. Ustaw własne wartości progowe (system alertów) i rejestruj dane do pamięci wewnętrznej urządzenia (data-logger). Korzystaj z funkcji komputera pokładowego, takich jak pomiary dystansu, prędkości czy zużycia paliwa.

Pełny opis UKP-PRO, instrukcje, oprogramowanie itd. są dostępne w: PRODUKTY->UKP-3 / UKP-PRO

Zawartość zestawu:

  • Uniwersalny Komputer Pokładowy (UKP-PRO) - moduł sterujący (wersja PRO),
  • wyświetlacz (do wyboru u góry z listy rozwijanej),
  • taśma do wyświetlacza (ok. 100cm),
  • złącze 24pin z wyprowadzonymi przewodami do lutowania (10-15cm),
  • złącze 12pin z wyprowadzonymi przewodami do lutowania (10-15cm),
  • cyfrowe czujniki temperatury DS18B20 (2szt.),
  • buzzer,
  • klawiaturka (3 przyciski),
  • kabelek USB

Do pobrania:

Opcjonalnie:

  • obudowa na wyświetlacz i przyciski (zobacz produkty powiązane),
  • wersja bez wyświetlacza (np. jako data-logger lub do współpracy z UKP Android).

 

W opakowaniu1

Podkategorie

Oceny użytkownikówNapisz swój komentarz
Napisz swój komentarz
3 z 3 użytkowników uznało tę recenzję za pomocną
  · 5 miesięcy temu.
I have had the UTCOMP Pro fitted to my car for a few years now. I have used every input on the unit and is particularly useful to connect a wideband O2 input. Overall I am pretty satisfied and there is nothing else on the market to match it. However if you want to make use the fuel computer part of it, you should look elsewhere as this part of the UTCOMP is poorly designed. Firstly, if you want to use gallons instead of Litres for your fuel tank capacity, you can only input them in whole numbers, pretty bad for any accuracy unless your tank capacity is exactly to the Gallon. Secondly, the fuel sender input to the UTCOMP can be calibrated for Empty and Full voltages ok, but the "Fuel Remaining" and "Remaining Miles" displays fluctuate so much when driving that they are totally useless. There appears to be no dampening of any kind on these displays (unlike a normal analogue Fuel Gauge). When this was pointed out to Reveltronics they said that "Fuel Remaining" and "Remaining Miles" were calculated from the mpg rather than relating directly to the Fuel Tank sender signal and that there was no workaround for this problem. So really, the only useable displays of the Fuel Computer part of the UTCOMP is "Average MPG" (which can be calibrated over time pretty accurately) and the UTCOMP "Fuel Tank" capacity screen itself which appears to be adequately damped. You will have to calculate the "Miles Remaining" yourself on a calculator if you want any form of accuracy. I was somewhat disappointed with this part of the UTCOMP. I was hoping that it may offer the same accuracy as a production car fuel computer, but if falls way short of that unfortunately.
Czy ta opinia była pomocna?
0 z 0 użytkowników uznało tę recenzję za pomocną
  · 1 lat temu.
Hi! My car is evo 6, and the meter used is a defi genuine product. I would like to ask if I can add your product to the defi sensor?
Czy ta opinia była pomocna?
REVELTRONICSHi Martin, you can connect your existing sensors in parallel to UTCOMP. Please check this tutorial and example:
https://forum.reveltronics.com/viewtopic.php?f=28&t=127
https://forum.reveltronics.com/viewtopic.php?f=28&t=265
1 lat temu.OdpowiedźLink
4 z 4 użytkowników uznało tę recenzję za pomocną
  · 3 lat temu.
I have an Audi TT MK1 and a colorMFA where I can get some data though CAN bus but with UTCOMP now I can get EGT, AFR and Fuel pressure on a specific screen and datalog all this... that is great for engine tunning and ensure the health of our cars !
Furthermore the whole HW is very good qality as for the sensors, Arthur does know the whole industrialization flow with software support, pretty rare !
very good...
Czy ta opinia była pomocna?
3 z 3 użytkowników uznało tę recenzję za pomocną
  · 6 lat temu.
I used few months basic version and replaced it with pro and in my opinion the difference is huge. I can give 4 stars for UTCOMP-3 and 5 stars for UTCOMP-PRO. First of all - number of inputs - I can connect more sensors to pro version (the reason why I changed). Secondly - OLED display - it is gorgeous. Black is black and contrast is phenomenal. OLED from pro version is also noticeable bigger and has prettier icons. There is more differences but I mention from my point of view. So if you do not need to connect a lot of sensors, LCD display is fine for you and you do not need these extra features than basic version is good choice. If you want to have better display (and you have place for it) or more inputs for analog sensors then I recommend pro version.
Czy ta opinia była pomocna?
REVELTRONICSHi Matt. Thanks for your reviews. I'd like to only mention that utcomp-pro has also additional memory for data-logger (missing in utcomp-3), output switch e.g. for relay control (also missing in utcomp-3) and 4 user customizable screens (vs. 1 user screen in utcomp-3). PRO version has also more accurate analog measurements because each unit has calibrated internal voltage reference (adc inputs accuracy +/- 0,02V in UTCOMP-PRO vs +/- 0,05V in UTCOMP-3). All differences are listed here: https://forum.reveltronics.com/viewtopic.php?f=28&t=176
6 lat temu.OdpowiedźLink
2 z 2 użytkowników uznało tę recenzję za pomocną
  · 6 lat temu.
bought pro version few months ago (which is awesome), meanwhile received update with new features and now I noticed android app which is very nice addon - I like how they care about product and customers.
Czy ta opinia była pomocna?
1 z 2 użytkowników uznało tę recenzję za pomocną
  · 6 lat temu.
Great device.
Really quick email support.
Czy ta opinia była pomocna?
1 z 1 użytkowników uznało tę recenzję za pomocną
  · 7 lat temu.
Komputerek zakupiony plus czujniki takie jak;
Analogowy czujnik temperatury typu NTC
Precyzyjny analogowy czujnik ciśnienia o zakresie pomiarowym do 150 PSI (10 BAR)
Sprzedawca bardzo mily i bardzo, ale bardzo pomocny.Nawet w piatek wieczorem potrafil mi napisac email co i jak powinno sie robic. Naprawde polecam ten komputerek jest super sprawa jak i tego sprzedawce. Autko do ktorego zamontowalem ten komputerek to Opel Astra 2.0 dti. Wszystko smiga jak powinno. Pozdrawiam
Czy ta opinia była pomocna?
1 z 1 użytkowników uznało tę recenzję za pomocną
  · 7 lat temu.
Komputer subaru BAJA Transakcja przebiegła pomyślnie. Polecam
Czy ta opinia była pomocna?
1 z 1 użytkowników uznało tę recenzję za pomocną
  · 7 lat temu.
Awesome product, fast shipping, well packed - Very Happy AAA+++
Czy ta opinia była pomocna?
0 z 0 użytkowników uznało tę recenzję za pomocną
  · 8 lat temu.

very happy with product and service

Czy ta opinia była pomocna?

Copyright © 2012 - 2020 REVELTRONICS